Quest Technical Details
Typical Channel Configurations
| Model |
MS-2 |
MS-3 |
MS-4 |
MS-5 |
| Variation |
Color |
Mono |
Color |
Mono |
RGB |
Color |
RGB |
Standard |
| Band 1 (nm) |
RGB
Bayer |
400-700 |
RGB
Bayer |
400-700 |
400-500 |
RGB
Bayer |
400-500 |
400-500 |
| Band 2 (nm) |
750-1000 |
750-850 |
750-850 |
500-600 |
400-700 |
500-600 |
500-600 |
| Band 3 (nm) |
N/A |
850-1000 |
850-1000 |
600-700 |
750-850 |
600-700 |
600-700 |
| Band 4 (nm) |
N/A |
N/A |
850-1000 |
750-1000 |
750-850 |
| Band 5 (nm) |
N/A |
N/A |
N/A |
850 -1000 |
Extended Spectral Capabilities
The spectral bands for
the Condor-1000 models are generally limited to the 400-1000 nm range by
the characteristics of the silicon sensors.
Actual bands for each channel can be determined in discussion
with Quest but can be wide, narrow, overlapping or any combination.
In addition, sensors with Bayer or other color filter arrays or
Foveon layered sensors can be used on one or more prism outputs to
increase the effective number of channels.
For extension into the
UV or SWIR, sensor designed for these bands can be mixed with standard
silicon sensors. The
possible total spectral
range is 300 to 2400 nm.
Standard Image Sensors
All models are
available with these sensors.
All sensors have global shuttering and good near infrared
response. The ICX618
3-channel model will accept C-mount lenses.
| Image Sensor |
Sony ICX618 |
Sony ICX285 |
Sony ICX625 |
Cypress IBIS-5 |
| Sensor Type |
Interline CCD |
Interline CCD |
Interline CCD |
CMOS |
| Active Area (mm-H x V |
3.69 x 2.77 |
8.89 x 6.70 |
8.45 x 7.07 |
8.58 x 6.86 |
| Pixel Pitch (µm
- H x V) |
5.6 x 5.6 |
6.54 x 6.54 |
3.45 x 3.45 |
6.7 x 6.7 |
| Pixel Matrix (H x V) |
659 x 494 |
1360 x 1024 |
2448 x 2050 |
1280 x 1024 |
| Frame Rate (Hz, full frame) |
120 |
15 |
15 |
27 |
Camera Data Interfaces
All models are
available with 8, 10 or 12-bit outputs over CameraLink, GigE or optical
fiber. Separate triggering
controls are provided.
Quest Technical Details |
Separation Prism Technology |
Quest Main Page
Request information from our
Inquiry page
|
