|
Optec supplies prisms at all levels of assembly to meet the
specific needs of each customer. From bare glass to multi-sensor
aligned assemblies, Optec is prepared to provide prisms is small
or large quantities. |
 |
Prism Glass Only
For initial experimentation, Optec supplies complete, cemented
prisms with internal separation filters, matched optical
distances and accurate, polished input and output surfaces in a
variety of sizes. |
 |
Prism Glass with
Trim Filters
Filters of nearly any kind can be cemented to the prism glass to
modify the bandpass of each output port or to restrict the
overall bandpass at the input. Optec carefully matches the
filter thicknesses to assure equal optical path lengths. |
 |
Prism Glass with
Mounts
For easier setup and alignment, Optec supplies prisms mounted to
metal faceplates with standard lens mounts. As an option, each
of the prism faces can be fitted with a holder for removable
trim filters, adjustable sensor supports or both. |
 |
Aligned Prism
Assemblies
In production, Optec supplies complete prism assemblies with
sensors precisely aligned and cemented to the prism output
ports. These assemblies can include lens mounts and filters at
any or all of the input and output faces. |
 |
Complete Cameras
When the customer has selected particular camera to be used in a
multi-channel assembly, Optec can disassemble the cameras, align
the sensor boards on the prism and then reassemble the
multi-channel electronics into a compact package. |
